LED LIGHT BULB – Differences and Advantages

LED LAMPS-what are they? Differences and advantages.

LED LIGHT BULB - Differences and Advantages

Qualities and differences

Advantages:
Reduced maintenance costs. In function of your long service life, maintenance is much smaller, representing lower costs.

Efficiency:
Have a higher efficiency than the incandescnetes Lamps and halogen lamps and, today, very close to the efficiency of fluorescent (around 50 lumens/Watt) but this number is likely to increase in the future.

Low voltage operation:
Does not represent danger to the installer.

Resistance to impacts and vibrations: Uses solid-state technology, so no filaments, glass, etc., increasing your strength.

Dynamic control of colour:
With proper use, you can obtain a varied spectrum of colors, including various shades of white, allowing a perfect fit of the desired color temperature.

Instant Activation:
Have instant activation, even when operating at low temperatures.

Variable Intensity control:
Its luminous flux is variable depending on the variation of electric current applied to it, making it, with it, a precise adjustment of the light intensity of the lamp.

Vivid and saturated without filters:
Emits monochromatic wavelength, which means emission of light in the right color, (see spectrum of colors) making it more vivid and saturated.
According to Listofledlights, the colored LEDs do not require the use of filters that cause loss of intensity and cause a change in color, especially in external fixtures due to the action of ultraviolet radiation from the Sun

Direct light, increasing the efficiency of the system:
Although still not be the most efficient light source, lighting fixture can be obtained with high efficiency, due to the possibility of directing of the light emitted by the LED.

Environmentally friendly:
It does not use mercury or any other element that causes damage to nature.

Absence of ultraviolet:
Do not emit ultraviolet radiation being ideal for applications where this type of radiation is undesirable.
Ex.: Paintings-works of art etc.

Absence of infrared:

Also do not emit infrared radiation, causing the beam to be cold.

Appropriate technology
P.w. M, it is possible the dimerization between 0% and 100% of your intensity, and using Microprocessor Controllers Colormix, new colors, mixtures of basic colors.
You are: white, blue, green, blue, verd, yellow, red.

Unlike fluorescent lamps
It has a higher wear your life at the time they are linked, in LEDs is possible firing and quickly wipe the flash effect, without the expense of their working life.

Longer service life:
Depending on the application, the service life of the equipment is long, without the need for Exchange.
It is considered as service life minimum maintenance of light equal to 70% after 50,000 hours of use